Skip to content

A717 Send


A717 Send Loop demo is used to execute multiple ARINC 717 frame transmit cycles.
The A717 Receive demo is used to receive the ARINC 717 messages.


Once session is started, this demo configures the ARINC 717 port (bit encoding, subframe size and port count).

Before starting the transmit cycle, user needs to select the number of ARINC 717 subframes to transmit, number of transmit cycles, wait time between these cycles and enter the ARINC 717 frames to send onto the data bus. Once the cycles are executed the port is closed and the session is terminated.

Running both Send and Receive Loop demos

A717 Send and the A717 Receive VIs are used to demonstrate sending and receiving Arinc 717 messages using disctincts VIs. The Receive Loop demo VI will reset the device and must be started before the Send Loop VI demo.

1- Open boths A717 Send and A717 Receive
2- Start A717 Send
3- Start A717 Receive

See Also

A717 Receive
A717 Send Receive