Home Products Company News Contact Us Support MAXIM
Copyright © 2008 MAX Technologies, Inc. All rights reserved.
The IPM-DIO-48 is a standard IndustryPack (IPack) module that can be used with MAX Technologies’ PCI, CPCI, VME and PXI intelligent carrier boards. The IPM-DIO-48 module can also be used with MAX Technologies’ MAXVME-6400 VME-64x dumb carrier board or third party carrier board that offers 32-MHz IPack support.
Software Ordering Information
Additional configurations and accessories are available. Please contact us to inquire.
Supported IndustryPACK Carrier Boards Specifications
Data Sheet pdf
OVERVIEW
The IPM-DIO-48 is a programmable discrete I/O module with specialized features for precise timing applications and is available with 48 I/O lines.
The module was designed to meet specific needs for control and acquisition of discrete signals.
Each of the 48 lines is programmable as input or output. The signal transitions are stored in the FIFO memory. Each datum in memory is accompanied by a control word. This control word makes it possible to set the precise moment of an output transition and also allows the precise time-tagging of the input transitions.
Carrier Board Support
The functionality of the IPM-DIO-48 is further enhanced by the power of MAX Technologies’ line of intelligent multi- platform (VME, PCI, CPCI, PXI) carrier boards. All modules and carrier boards are synchronized and time correlated to 32-bit microsecond-resolution.
Software Support
The MX-Foundation library provides high-level abstraction of hardware and allows to easily control mixed protocols and I/O modules on one or multiple carrier boards.
  1. FEATURES
  2. ‣Up to 48 Open Collector Input/Output channels on a single size IPack module
  3. ‣Up to 192 Open Collector Input/Output channels on one single carrier board
  4. ‣Each I/O independently configurable as Input or Output
  5. ‣Input threshold level set at 8.5 Volts with a ~1 Volts hysteresis
  6. ‣Each Output monitored by a separate input feedback pin
  7. ‣Each Input individually programmed to generate an interrupt on an edge or a logic level
  8. ‣32-bit one microsecond resolution local timer
  9. ‣Two 32-bit timetag registers available to track transitions on any of the 48
    I/O lines
  10. SOFTWARE
  11. ‣MX-Foundation multi-protocol software API available for Windows and Linux
  12. ‣MAXIM Windows GUI
Discrete I/O
  1. •48 lines
  2. •Independently configurable to input or output
  3. •Transition detection on inputs
FIFO
  1. •Also available with 16 words FIFO buffer for each channel
Time Synchronization
  1. •32-bit, 1 microsecond resolution and 1 microsecond accuracy
Threshold Level
  1. •8.5V with 1V Hysterisis
Input/Output voltage level
  1. •50V maximum @ 20 mA / channel
IPack Module bus clock
  1. •32 MHz
Physical dimensions
  1. •IndustryPack Standard - Single size
  2. •3.9” x 1.8” (9.906 cm x 4.572 cm)
Environmental
  1. •Standard Operating Temperature: 0°C to 70°C
  2. •Extended Operating Temperature: -40°C to 85°C (Optional)
  3. •Relative Humidity for operation: 0 to 95% (non-condensing)
Reliability MTBF (MIL-HDBK-217 FN2, 30 °C)
  1. •1 153 800 hours
Power consumption
  1. •+5V : 300 mA MAX
MAXIM MX Foundation
MAXIM is a powerful and easy-to-use test and measurement GUI application for Windows 2000/XP
MX-Foundation is a multi-protocol high-level API that takes full advantage of the MAX Technologies’ intelligent carrier boards. MX-Foundation is available for Windows and Linux.
  Part Number
Description
IPM-DIO-48, DISCRETE IP MODULE,  48 I/O
MAX-IP-200123
IPM-DIO-48-FIFO, DISCRETE IP MODULE,  48 I/O, 16 words FIFO buffer per I/O line
MAX-IP-200124
Ask for a quotation Ask for a quotation build your system