Home Products Company Contact Us Support MAXIM
Copyright © 2010 MAX Technologies, Inc. All rights reserved.
 
The IPM-ADC is a standard IndustryPack (IPack) module that can be used with MAX Technologies’ PCI, CPCI and PXI intelligent carrier boards.
Software Ordering Information Supported IndustryPACK Carrier Boards Specifications Data Sheet pdf
OVERVIEW
The IPM-ADC provides a fast 16-bit resolution Analog to Digital (A/D) conversion. Available as a 32 MHz single-size Industry Pack (IPack) module, the IPM-ADC offers programmable scan control and up to four scanning modes.
The user can scan all channels or define a subset for more frequent sampling. Burst mode scans selected channels at the maximum conversion rate. Uniform mode performs conversions at user-defined intervals. Both modes can scan continuously, or execute a single cycle upon receiving a trigger. Analog samples and timetags are accessible through a 2048 word FIFO.
The IPM-ADC includes on-board IRIG-B decoder and sampling timetags providing accurate timing and synchronization between channels and modules.
Carrier Board Support
The functionality of the IPM-ADC is further enhanced by the power of MAX Technologies’ line of intelligent multi- platform (PCI, CPCI and PXI) carrier boards. All modules and carrier boards are synchronized and time correlated to 32-bit microsecond-resolution.
Software Support
The MX-Foundation library provides high-level abstraction of hardware and allows to easily control mixed protocols and I/O modules on one or multiple carrier boards.
  1. FEATURES
  2. ‣16-bit A/D converter
  3. ‣2048 word FIFO
  4. ‣32 bit 1us resolution timetag
  5. ‣On-board IRIG-B decoder
  6. ‣4us conversion time (250 kS/s)
  7. ‣16 differential or 32 single-ended inputs    
  8. ‣Available input voltages:
    ±2.5V, ±5V, ±10V, 0-2.5V, 0-5V,
    and 0-10V ranges
  9. ‣Programmable scan control
  10. ‣Four scanning modes
  11. ‣User-programmable interval timer
  12. ‣External trigger input and output
  13. ‣Programmable gain for individual channels
  14. ‣Post-conversion interrupts
  15. ‣Available in extended temperature
  16. ‣Programmable data format (binary 2’s complement, straight binary)
  17. SOFTWARE
  18. ‣MX-Foundation multi-protocol software API available for Windows, Linux and Mac OS X
  19. ‣MAXIM Windows GUI
Input channels
  1. •16 differential or 32 single-ended
Switch-selectable input range
  1. •±2.5V, ±5V, ±10V, 0-2.5V, 0-5V and 0-10V ranges
Software-programmable gain (per channel)
  1. •1X, 2X, 4X and 8X
Time Synchronization
  1. •32-bit, 1 microsecond resolution and 1 microsecond accuracy
  2. •IRIG-B AM, Digital and 1-PPS inputs
Input resistance
  1. •1 MOhms, typical
A/D resolution
  1. •16-bit
Sampling Rate
  1. •One channel (max.): 250 KHz (4μs/conversion)
  2. •16 channels (differential): 15.6 KHz (64μs/16 ch)
  3. •32 channels (single-ended): 7.8 KHz (128μs/32 ch)
FIFO Buffer
  1. •2K words FIFO
Input over voltage protection
  1. •With power ON: Vss –20V to Vpp 40V
  2. •With power OFF: Vss –35V to Vpp 55V
IPack Module bus clock
  1. •32 MHz
Physical dimensions
  1. •IndustryPack Standard - Single size
  2. •3.9” x 1.8” (9.906 cm x 4.572 cm)
Environmental
  1. •Standard Operating Temperature: 0°C to 70°C
  2. •Relative Humidity for operation: 0 to 95% (non-condensing)
Reliability MTBF (MIL-HDBK-217 FN2, 30 °C)
  1. •468 917 hours
Power consumption
  1. •+5V: 233 mA max
  2. •+12V: 10 mA max
  3. •-12V: 10 mA max
MAXIM MX Foundation
MAXIM is a powerful and easy-to-use test and measurement GUI application for Windows XP
MX-Foundation is a multi-protocol high-level API that take full advantage of the MAX Technologies’ intelligent carrier boards. MX-Foundation is available for Windows, Linux and Mac OS X
  Part Number
Description
IPM-ADC Analog to Digital IPack Module, 16-bit resolution, 32-single or 16-differential lines, 2K FIFO, IRIG-B input MAX-IP-200136 $ 865.00
Price
build your system User’s Manual $ 865.00