Home Products Company Contact Us Support MAXIM
Copyright © 2010 MAX Technologies, Inc. All rights reserved.
The IPM-708 is a standard IndustryPack (IPack) module that can be used with MAX Technologies’ PCI, CPCI and PXI intelligent carrier boards. Software Ordering Information Supported IndustryPACK Carrier Boards Specifications
Data Sheet pdf
OVERVIEW
The IPM-708 provides two transmit and two receive ARINC 708 display bus channels. Available as a 32MHz single-size Industry Pack (IPack) module, the IPM-708 offers 32-bit transmit and receive time tagging with a precision of one microsecond. Flexible status and interrupt flags fully support both polling and interrupt-driven software strategies to ensure optimal real-time performance.
The IPM-708 contains on-board coupling transformers. A high-performance FPGA is used to provide encode/decode, error injection and detection, fail-safe timer, and transceiver control functions. As an added convenience, the IPM-708 comes with 16 general-purpose DIO ports, which can be individually programmed as inputs or outputs, and optional ARINC 429 channels. 32-bit timetags allow precise detection of edge transitions.
Carrier Board Support
The functionality of the IPM-708 is further enhanced by  the  power of MAX Technologies’ line of intelligent multi- platform (PCI, CPCI and PXI) carrier boards. All modules  and  carrier boards are synchronized and time correlated to 32-bit microsecond-resolution.
Software Support
The MX-Foundation library provides high-level abstraction of hardware and allows to easily control mixed protocols and I/O modules on one or multiple carrier boards.
  1. FEATURES
  2. ‣ARINC 708 protocol support
  3. ‣Two independent transmit and receive channels
  4. ‣Up to 4 IPack Modules on a single carrier board provides up to 8 Tx and 8 Rx per carrier board
  5. ‣Microsecond precise Tx and Rx timetags
  6. ‣Internal loopback capability
  7. ‣Error injection and detection (sync, bit rate, Manchester, and word length)
  8. ‣16 Discrete I/O lines
  9. ‣256 word Tx FIFO and 1024 word Rx FIFO
  10. ‣IRIG-B input support
  11. ‣Available in extended temperature
  12. SOFTWARE
  13. ‣MX-Foundation multi-protocol software API available for Windows, Linux and Mac OS X
  14. ‣MAXIM Windows GUI
Protocols supported
  1. •ARINC 708 Display Bus
Discrete Input/Output (DIO)
  1. •16 independently configurable to Input/Output mode
Channel speed
  1. •1 Mbps
Time Synchronization
  1. •32-bit, 1 microsecond resolution and 1 microsecond accuracy
  2. •IRIG-B AM, Digital and 1-PPS inputs
Buffersize per channel
  1. •256 word on transmission
  2. •1024 word on reception
IPACK Module bus clock
  1. •32 MHz
Physical dimensions
  1. •IPack Standard Single Size
  2. •3.9” x 1.8” (9.906 cm x 4.572 cm)
Environmental
  1. •Standard Operating Temperature: 0°C to 70°C
  2. •Relative Humidity for operation: 0 to 95% (non-condensing)
Power consumption
  1. •+5V, 230 mA IDLE / 630 mA Full load
Reliability MTBF (MIL-HDBK-217 FN2, 30 °C)
  1. • 605 075 hours
Electrical
  1. •Standard ARINC-708 Voltage Level
Additional features
  1. •Internal loopback supports busless operation
  2. •Complete independent channel configuration and operation
  3. •Transition detection on discrete Inputs (DIO)
  4. •Error injection and detection (sync, bit rate, Manchester, and word length)
MAXIM MX Foundation
MAXIM is a powerful and easy-to-use test and measurement GUI application for Windows XP
MX-Foundation is a multi-protocol high-level API that take full advantage of the MAX Technologies’ intelligent carrier boards. MX-Foundation is available for Windows, Linux and Mac OS X
  Part Number
Description
IPM-708, 1TX-1RX, 16 DISCRETE, ERR INJ, IRIG-B
MAX-IP-200750
IPM-708, 2TX-2RX, 16 DISCRETE, ERR INJ, IRIG-B
MAX-IP-200751
build your system