Home Products Company Contact Us Support MAXIM
Copyright © 2010 MAX Technologies, Inc. All rights reserved.
The IPM-561 is a standard IndustryPack (IPack) module that can be used with MAX Technologies’ PCI, CPCI and PXI intelligent carrier boards. Software Ordering Information Supported IndustryPACK Carrier Boards Specifications
Data Sheet pdf
OVERVIEW
The IPM-561 provides a high-channel-density solution to your ARINC 561/568 Avionics Databus requirements. Available as a 32 MHz single-size Industry Pack (IPack) module. The IPM-561 offers message scheduling and time-tagging with a precision of one microsecond.
On-board transmit/receive buffers have programmable almost-full/almost-empty thresholds, which fully support both polling and interrupt-driven software strategies to ensure optimal real-time performance.
The IPM-561 transmitters are short-circuit protected and offer programmable bit-rate and optional parity generation.
Receivers can be programmed to filter incoming messages based on their ARINC 561/568 labels. In addition, receivers can be configured for internal loopback or external loopback verification.
Carrier Board Support
The functionality of the IPM-561 is further enhanced by the power of MAX Technologies’ line of intelligent multi- platform (PCI, CPCI and PXI) carrier boards. All modules and carrier boards are synchronized and time correlated to 32-bit microsecond-resolution.
Software Support
The MX-Foundation library provides high-level abstraction of hardware and allows to easily control mixed protocols and I/O modules on one or multiple carrier boards.
  1. FEATURES
  2. ‣Up to 8 ARINC 561/568 channels on a single size IPack Module
  3. ‣Up to 32 ARINC 561/568 channels on one single carrier board
  4. ‣Configurable data rate per channel between 3906 bps to 15625 bps
  5. ‣32 ARINC Word FIFO expandable to 16 MB when used with MAX Technologies’ intelligent carrier board
  6. ‣Precision of one microsecond
  7. ‣Complete independent channel configuration and operation
  8. ‣Parity Error and Short Word Error detection
  9. ‣Short circuit protection on transmitters
  10. ‣Available in extended temperature
  11. SOFTWARE
  12. ‣MX-Foundation multi-protocol software API available for Windows, Linux and Mac OS X
  13. ‣MAXIM Windows GUI
Number of channels
  1. •4 TX, 4 RX channels
Channel speed
  1. •Two independent speeds, configurable per channel
  2. •Tx and Rx Speed Range: 3906 bps to 15625 bps  
Error Injection and Detection
  1. •Parity, +/- 1-bit gap length
Time Synchronization
  1. •32-bit, 1 microsecond resolution and 1 microsecond accuracy
IPACK Module bus clock
  1. •32 MHz
Physical dimensions
  1. •IPack Standard Single Size
  2. •3.9” x 1.8” (9.906 cm x 4.572 cm)
Environmental
  1. •Standard Operating Temperature: 0°C to 70°C
  2. •Relative Humidity for operation: 0 to 95% (non-condensing)
Power consumption
  1. •+5V @ 125 mA max
  2. •+12V @ 40 mA max
  3. •-12V @ 25 mA max
Reliability MTBF (MIL-HDBK-217 FN2, 30 °C)
  1. • 760 566 hours
Electrical
  1. •Standard ARINC-561 Voltage Level:
  2. •Receive: 7 to 17V for High and ±3V for Low
  3. •Transmit: 0V for Low and 12V for High
Additional features
  1. •Label Selection
  2. •Word Filtering
MAXIM MX Foundation
MAXIM is a powerful and easy-to-use test and measurement GUI application for Windows XP
MX-Foundation is a multi-protocol high-level API that take full advantage of the MAX Technologies’ intelligent carrier boards. MX-Foundation is available for Windows, Linux and Mac OS X
  Part Number
Description
IPM-561 4TX-4RX
MAX-IP-200116
build your system