|
MX Foundation 4
|
|
MX Foundation 4
|
The FlexMulti 629 supports BP (Basic Protocol) in periodic (A), aperiodic (B) and “C” mode transmission. The FlexMulti 629 includes the logic to fully program the TI, TG, SG and CID to emulate every remote terminal. Each of the 120 possible RT have an XPP like configuration. Bus monitoring allows capture of all labels and data words on the bus with a 10 nsec precision timestamp.
The following table lists the MAX Technologies' devices supporting ARINC 629 interfaces and the associated MX Foundation constants.
These MX Foundation constants are used by mxfDeviceModuleAllGet() to identify the ARINC 629 interface available on a device.
| Module model name | Module MXF constant |
|---|---|
| ARINC 629 Enhanced | MXF_MODULE_A629MRT_EH |
| IPM-629 | MXF_MODULE_A629MRT_REV2 |
The following table lists, for each device that supports ARINC 629, the number of buses and module index position for mxfDeviceModuleGet().
| Model | A629 Buses | A629 Module Index |
|---|---|---|
| FM629-2 | 2 | 0 |
| 1 | ||
| FM629-4 | 4 | 0 |
| 1 | ||
| 6 | ||
| 7 |
| Model | A629 Buses |
|---|---|
| MAX-IP-200161 | 1 |
The channels are arranged this way on each module:
| Bus Function | Channel position |
|---|---|
| Bus Monitor | 0 |
| Remote Terminal (0-119) | 1-120 |
